Skip to product information

1:32 BV 246 Hagelkorn

$12.79 $24.03
SKU: 0136
Free Shipping on all MPM Hobbies’ 3D Printed Products

3D Print Product Info

  1. Item(s) is/are LCD-based SLA printed using UV cured resin and will be shipped unpainted and with 3D print supports attached.
  2. All items receive a 20 min wash cycle with 2 ten-minute sonic wash cycles followed by a 2-to-8-minute cure. 
  3. Item can be primed with acrylic, lacquer or enamel type paint. Lightly sand and/or prime any horizontal striations due to the printing process.
  4. Remove supports starting from the tip down and start by freeing those supports connected to small and fragile details.
  5. Recommend using CA for attaching item to model or filling any imperfections.
  6. Item(s) will have features that are brittle or extremely delicate and prone to breaking if not properly handled.
  7. 3D print support configurations may be different than the ones in the photos if applicable.
  8. Photos may include the CAD rendered file used for printing to highlight details that do not stand out well in regular photos.
  9. Not intended for small children due to choking hazard and should only be purchased by experienced modelers due fine details and printer support removal.
  10. The number of items in your order is calculated by multiplying the quantity you selected by the number of items per set if applicable.
  11. The small holes on the print are necessary to drain the hollow parts of the item of leftover resin.  Fill hole with CA and sand. 

Blohm & Voss BV 246 Hagelkorn ("Hail") was a controlled sliding aerial bomb used against special purposes (ships, bridges, ...). It had a perfectly smooth jet shape. It was designed by Dr Richard Vogt, initially the designation BV 226 was used for it, only later, on 12 December 1943 the designation was changed to definitive BV 246.

The bomb was placed at the bottom of the bomber (more often the He 111, but the bomb was also hijacked by the Fw 190) and when the plane reached a high height (about 10,000 meters) near the target, it dropped a bomb. That protected the mother plane from anti-aircraft fire from the ground.

The design of the missile was quite simple, small wings were mounted on the jet's fuselage. They had a very unusual construction. There was a thin layer of concrete around the steel-aluminium core. There were cross tail surfaces at the back of the machine.

Several guidance systems have been tested, including "Radieschen"- which was used to guide the radar. Hagelkorn was the first anti-radar missile. Before the project was cancelled, 1100 were produced.  Blohm & Voss BV 246 - Wikipedia