Skip to product information

1:32 MLU-10/B 750-lb. Land Mine (Set of 4)

$16.14 $19.91
SKU: 0157
Free Shipping on all MPM Hobbies’ 3D Printed Products

3D Print Product Info

  1. Item(s) is/are LCD-based SLA printed using UV cured resin and will be shipped unpainted and with 3D print supports attached.
  2. All items receive a 20 min wash cycle with 2 ten-minute sonic wash cycles followed by a 2-to-8-minute cure. 
  3. Item can be primed with acrylic, lacquer or enamel type paint. Lightly sand and/or prime any horizontal striations due to the printing process.
  4. Remove supports starting from the tip down and start by freeing those supports connected to small and fragile details.
  5. Recommend using CA for attaching item to model or filling any imperfections.
  6. Item(s) will have features that are brittle or extremely delicate and prone to breaking if not properly handled.
  7. 3D print support configurations may be different than the ones in the photos if applicable.
  8. Photos may include the CAD rendered file used for printing to highlight details that do not stand out well in regular photos.
  9. Not intended for small children due to choking hazard and should only be purchased by experienced modelers due fine details and printer support removal.
  10. The number of items in your order is calculated by multiplying the quantity you selected by the number of items per set if applicable.
  11. The small holes on the print are necessary to drain the hollow parts of the item of leftover resin.  Fill hole with CA and sand. 

The BLU-14/B was an American 347 kg (766 lb) ground-penetrating anti-vehicle mine for release by low-flying (down to 11 m (35 ft) altitude) aircraft.  It was a derivative of the MLU-10/B 750 lb. land mine, and therefore essentially identical in shape and weight to the BLU-31/B anti-vehicle demolition mine and bomb.  The designation "BLU" stands for Bomb Live Unit, as opposed to "BDU" (Bomb Dummy Units) used for practice.

The BLU-14/B has a low, stable ricochet trajectory that is predictable within close limits. It will penetrate into the ground at an angle that is less than half that required by an M117 bomb.  The BLU-14/B and MLU-10/B differ only in regard to their respective fusing.

All three weapons (the BLU-14, MLU-10, and MLU-31) have a blunt flat front end of 2.5" thickness.  BLU-14 - Wikipedia